0 Items (Empty)
Nissan ZD30DD and KA23DE engine factory workshop and repair manual download
 |
Nissan ZD30DD and KA24DE engine factory workshop and repair manualon PDF can be viewed using free PDF reader like adobe , or foxit or nitro . It is compressed as a zip file which you can extract with 7zip File size 7 Mb Searchable PDF document with bookmarks. Covers the Nissan ZD30DD and KA24DE engine Engine Room Cover About the ZD30DD Engine
The Nissan ZD30 engine family is a 3 litre (2953 cc), inline four cylinder, diesel engine that replaced the Nissan QD engine. Available in both traditional turbo, variable geomtery turbo(aka VGT or VNT), and non turbo versions. The engine uses a Drive-by-wire engine management system with a draw-through MAF sensor. Produced from 1999-current, the newest models feature a common rail design. Patrol - Chassis Code Y61 The power differences stem from types of vehicles and routing of necessary pipings, as well types of manifold with different features. Engines that produce 170 hp (130 kW) have MAF sensors incorporated in them, while the 120 hp (89 kW) and 130 hp (97 kW) versions do not use a MAF sensor. Conversions can be done using the ECU from any of the higher horsepower units using the MAF sensor along with the MAF, which has to be wired into the loom of the 120 hp (89 kW) and 130 hp (97 kW) versions. Version and production ZD30DD is a DOHC, Fuel injected engine 105 hp (78 kW) Power and torque Nissan Caravan - Urvan ZD30DD 105 hp (78 kW) @3800, 21.3 kg·m (209 N·m; 154 lb·ft) (MT)/ 23 kg·m (230 N·m; 170 lb·ft) (AT) @ 2000 rpm (non-turbo) About the Nissan 2.4L KA24DE engineThe KA engines were a series of inline-4 four-stroke gasoline piston engines manufactured by Nissan, which were offered in 2.0 L and 2.4 L versions. The engines blocks were made of cast-iron, while the cylinder heads were made of aluminum. Despite their large capacity, this motor was not equipped with balance shafts. When used in the passenger cars both versions of the KA24 used a crank girdle, as opposed to individual caps. In the Nissan Hardbody and Frontier applications a crank girdle was not used. The 2.4 L (2389 cc) KA24DE was used in many Nissan cars and trucks. Most KA24DEs bound for the US were built in the Mexican city of Aguascalientes, with the exceptions of the 240SX, 1994-97 Altima (re-badged Bluebird SSS), and the U13 Bluebird released in Australia with FWD configuration which were manufactured in Fukuoka Prefecture, Japan. The Mexican block is the same as the KA24E but has a DOHC head on it and doesn't incorporate the design improvements of the block from Japan. The KA24DE is very similar to the KA24E. The KA24E is SOHC with three valves per cylinder actuated by rocker arms, and the KA24DE is DOHC with four valves per cylinder and shim-over-bucket valve actuation. Design improvements of the block from Japan include the use of a knock sensor, girdled main bearings, different oil pan (not interchangeable between Japanese and Mexican blocks), different oil pickup (front pickup on Japanese block and side on Mexican block), dipstick location (toward the rear of block on Mexican and mid block on Japanese) and piston oil squirters. In addition to the increased power and torque, the KA24DE has a higher redline than the KA24E. Bore × Stroke: 89.0 × 96.0 mm (3.50 in. x 3.78 in.) Applications 2000-2004 Nissan Xterra Nissan ZD30DD and KA24DE engine factory workshop and repair manual Download |
